Overview of the hardware and software setup procedures for the MAJIC® series of intelligent debug probes.

• MAJICO and MAJIC-LT
• MAJIC-LX and MAJIC-MT
• MAJIC, MAJIC-MX, and MAJIC-PLUS

• Version numbers of EDT software components and MAJIC® firmware.
• Release notes for EDT software components.
• Last minute update information.

Documents the changes and additions in current and recent MAJIC® firmware versions.

Full information on setting up and using the MAJIC® series of intelligent debug probes, and the MON command language.

Documents the user interface and functionality of the EDB Source Level Debugger. If you did not purchase EDB, then contact sales@epitools.com for an evaluation copy.

User manuals for the eXDI drivers and Plug-Ins for using a MAJIC® probe with Microsoft Platform Builder. If you did not purchase the eXDI Plug-In Extended Features option, then contact sales@epitools.com to see what you are missing.

Documents how to configure the MDI Interface Library for using a MAJIC® probe with GDB, eXDI, and other MDI compliant debuggers. For additional information on using GDB with MDIServer, please refer to the Using a MAJIC® Probe With A Linux PC or Using a MAJIC® Probe in a Cygwin Environment application notes.

User manual for the optional Wind River Back End, which allows Tornado to interface directly to a MAJIC® probe. Note that the Wind River Back End option is not required when using EDB to debug programs that are built with the Tornado compilation tools. If you did not purchase the Wind River Back End option and want to use the Tornado 2.0 or 2.1 debug environment, then contact sales@epitools.com.

Step-by-step instructions for installing EDT software updates, service packs, MAJIC® firmware updates, and changing the MAJIC^PLUS® Trace Control PLD, using a PC running a Microsoft Windows operating system. Linux customers should refer to the Using a MAJIC® Probe With A Linux PC for equivalent information.

Covers how to configure your MAJIC® probe to work with a USB to Ethernet Adapter connected to a PC running a Microsoft Windows operating system.

Instructions for installing and using the EDT software package and GNU GDB on a PC running a Linux operating system. Additional information on setting up and using GDB with a MAJIC® probe is provided in the GDB readme.txt file.

Instructions for configuring and using the EDT software package and GNU GDB in a Cygwin environment. Additional information on setting up and using GDB with a MAJIC® probe is provided in the GDB readme.txt file.

Explains the steps necessary to configure and use MontaVista software tools with a MAJIC® probe. It provides specific information on:

• Connecting a MAJIC® probe with GDB to debug the MontaVista Linux Kernel. See also Using a MAJIC® Probe With A Linux PC and the GDB readme.txt file for additional information on using GDB with a MAJIC® probe.
• Setting up debug environment for simultaneous kernel level debug (including loadable modules) and application level debug.

Explains how to program the flash memory on your target board using a MAJIC® probe and the flash utility included in the EDT software package. See Flash Parts List for a list of currently support flash devices.

Covers how to port EDB's RTOS integration DLL to currently unsupported or custom RTOS's.

Describes how a MAJIC® probe manages complex JTAG configurations, and provides specific recommendations for designing a multi-TAP device. Also provides a good overview of basic JTAG operation and connection.

Explains the special considerations that arise when using a MAJIC® probe with a simulation model running on a hardware emulation system.

Documents the EJTAG connector details and recommended part numbers, electrical specifications for the JTAG and PCTrace interfaces, and discusses other board design considerations.